E-Vac Vacuum Generator Holds Labels Straight On Can Line
Customer makes labeling machines. They sold a machine to put labels onto the side of a tobacco can, but could not keep the label straight as the can rolled across the receiver plate, where the label was applied. Their customer would not accept shipment until that issue was resolved. They drilled vacuum holes in the receiver plate and installed a Model 810008H In-Line E-Vac High Vacuum Generator to hold the label in place while being adhered to the can. Their customer was satisfied and signed off on the improved design, which saved them from a costly cancelled order.
-
Model 900804 1/4 NPT E-Vac Check ValveA vacuum check valve holds the vacuum in case of compressed air loss. E-Vac Check Valves are available in 1/4 FNPT, 3/8 FNPT and 1/2 FNPT Learn More$41.00
-
Model 800002M 2.1 SCFM E-Vac Low Vacuum Generator with Straight Through Muffler (Porous)
EXAIR's In-Line E-Vacs with Mufflers include sound reducing mufflers that are designed to significantly lower noise without affecting the E-Vac's performance. In-Line E-Vacs are engineered to produce instantaneous vacuum at the point-of-use. These single stage, cylindrical units are compact and easy to mount. Low vacuum units up to 21" Hg (71 kPa) with vacuum flows up to 18.5 SCFM (524 SLPM) are typically used for porous materials
Learn More$139.00 -
Model 800002H 2.1 SCFM E-Vac Low Vacuum Generator with Standard Muffler (Porous)
EXAIR's In-Line E-Vacs with Mufflers include sound reducing mufflers that are designed to significantly lower noise without affecting the E-Vac's performance. In-Line E-Vacs are engineered to produce instantaneous vacuum at the point-of-use. These single stage, cylindrical units are compact and easy to mount. Low vacuum units up to 21" Hg (71 kPa) with vacuum flows up to 18.5 SCFM (524 SLPM) are typically used for porous materials
Learn More$126.00 -
Model 800005H 5.4 SCFM E-Vac Low Vacuum Generator with Standard Muffler (Porous)
EXAIR's In-Line E-Vacs with Mufflers include sound reducing mufflers that are designed to significantly lower noise without affecting the E-Vac's performance. In-Line E-Vacs are engineered to produce instantaneous vacuum at the point-of-use. These single stage, cylindrical units are compact and easy to mount. Low vacuum units up to 21" Hg (71 kPa) with vacuum flows up to 18.5 SCFM (524 SLPM) are typically used for porous materials
Learn More$179.00 -
Model 800008H 8.4 SCFM E-Vac Low Vacuum Generator with Standard Muffler (Porous)
EXAIR's In-Line E-Vacs with Mufflers include sound reducing mufflers that are designed to significantly lower noise without affecting the E-Vac's performance. In-Line E-Vacs are engineered to produce instantaneous vacuum at the point-of-use. These single stage, cylindrical units are compact and easy to mount. Low vacuum units up to 21" Hg (71 kPa) with vacuum flows up to 18.5 SCFM (524 SLPM) are typically used for porous materials
Learn More$207.00 -
Model 800013H 12.6 SCFM E-Vac Low Vacuum Generator with Standard Muffler (Porous)
EXAIR's In-Line E-Vacs with Mufflers include sound reducing mufflers that are designed to significantly lower noise without affecting the E-Vac's performance. In-Line E-Vacs are engineered to produce instantaneous vacuum at the point-of-use. These single stage, cylindrical units are compact and easy to mount. Low vacuum units up to 21" Hg (71 kPa) with vacuum flows up to 18.5 SCFM (524 SLPM) are typically used for porous materials
Learn More$269.00 -
Model 800017M 16.8 SCFM E-Vac Low Vacuum Generator with Straight Through Muffler (Porous)
EXAIR's In-Line E-Vacs with Mufflers include sound reducing mufflers that are designed to significantly lower noise without affecting the E-Vac's performance. In-Line E-Vacs are engineered to produce instantaneous vacuum at the point-of-use. These single stage, cylindrical units are compact and easy to mount. Low vacuum units up to 21" Hg (71 kPa) with vacuum flows up to 18.5 SCFM (524 SLPM) are typically used for porous materials
Learn More$446.00 -
Model 800008M 8.4 SCFM E-Vac Low Vacuum Generator with Straight Through Muffler (Porous)
EXAIR's In-Line E-Vacs with Mufflers include sound reducing mufflers that are designed to significantly lower noise without affecting the E-Vac's performance. In-Line E-Vacs are engineered to produce instantaneous vacuum at the point-of-use. These single stage, cylindrical units are compact and easy to mount. Low vacuum units up to 21" Hg (71 kPa) with vacuum flows up to 18.5 SCFM (524 SLPM) are typically used for porous materials
Learn More$223.00 -
Model 800003H 3.1 SCFM E-Vac Low Vacuum Generator with Standard Muffler (Porous)
EXAIR's In-Line E-Vacs with Mufflers include sound reducing mufflers that are designed to significantly lower noise without affecting the E-Vac's performance. In-Line E-Vacs are engineered to produce instantaneous vacuum at the point-of-use. These single stage, cylindrical units are compact and easy to mount. Low vacuum units up to 21" Hg (71 kPa) with vacuum flows up to 18.5 SCFM (524 SLPM) are typically used for porous materials
Learn More$126.00 -
Model 800017H 16.8 SCFM E-Vac Low Vacuum Generator with Standard Muffler (Porous)
EXAIR's In-Line E-Vacs with Mufflers include sound reducing mufflers that are designed to significantly lower noise without affecting the E-Vac's performance. In-Line E-Vacs are engineered to produce instantaneous vacuum at the point-of-use. These single stage, cylindrical units are compact and easy to mount. Low vacuum units up to 21" Hg (71 kPa) with vacuum flows up to 18.5 SCFM (524 SLPM) are typically used for porous materials
Learn More$410.00