Eliminating Fiberglass Dust Prior To Painting
The customer manufactures the large fiberglass housings for engine compartments of 18 wheeler tractors. They experience a problem with leftover fiberglass after they do finish sanding of the fiberglass body to get it ready for paint. They have a very difficult time blowing off the fiberglass because of all the static generated during the sanding process. Anything they do now to remove dust just promotes more sticking. This is a problem that affects the surface finish of the final product. With a Model 8293 Ion Air Gun and power supply, the customer is now able to eliminate the static buildup on the housing and blow away the dust after sanding to make for an easier and faster cleaning process.
-
Model 8293 Gen4® Ion Air Gun™ SystemEXAIR's handheld Gen4® Ion Air Gun System includes the Model 7960 selectable voltage power supply (115VAC/230VAC, 50/60Hz). It combines portability, incredibly fast static decay rates, and low compressed air consumption to efficiently remove static, contaminants and dust from three dimensional parts prior to assembly, packaging, painting or finishing.
Learn More$1,177.00 -
Model 8493 Gen4® Ion Air Gun™ KitEXAIR's Gen4® Ion Air Gun Kit System includes everything needed to connect and start using right away! The Kit includes the Gen4 Ion Air Gun, Model 7960 Gen4 Power Supply, filter separator and pressure regulator (with coupler). It combines portability, incredibly fast static decay rates, and low compressed air consumption to efficiently remove static, contaminants and dust from three dimensional parts prior to assembly, packaging, painting or finishing.
Learn More$1,401.00 -
Model 8193 Gen4® Ion Air Gun™ (includes 10' cable)EXAIR's handheld Gen4® Ion Air Gun combines portability, incredibly fast static decay rates, and low compressed air consumption to efficiently remove static, contaminants and dust from three dimensional parts prior to assembly, packaging, painting or finishing.
Learn More$620.00