Eliminating Static on Rollers Applying Film to Doors and Curing the Adhesive

A customer manufactures wood doors. Part of the manufacturing process involves putting a film on the edges of the doors, using an adhesive material. The film comes off the rollers and has a static charge on the surface. Also, the adhesive is not curing in an acceptable time prior to the next step in the process. A Model 112148 48" (1219mm) Super Ion Air Knife System will help to both eliminate the static charge and provide cooling/drying for the adhesive material so it cures much faster. Also, because it is a batch process, and not a continuous one, a Model 9057 Electronic Flow Control will also help to save air usage in the plant.

  1. Model 112148 48" Gen4 Super Ion Air Knife System
    Applications
    Model 112148 48" Gen4 Super Ion Air Knife System
    EXAIR's Gen4 Super Ion Air Knife Systems add the Model 7960 Gen4 Power Supply (115 VAC/230 VAC, 50/60 Hz). EXAIR's Gen4 Super Ion Air Knife removes static electricity from plastics, webs, sheet stock and other product surfaces where tearing, jamming or hazardous shocks are a problem. The laminar sheet of air sweeps surfaces clean of static, particulate, dust and dirt.
    $2,716.00
  2. Model 112154 54" Gen4 Super Ion Air Knife System
    Applications
    Model 112154 54" Gen4 Super Ion Air Knife System
    EXAIR's Gen4 Super Ion Air Knife Systems add the Model 7960 Gen4 Power Supply (115 VAC/230 VAC, 50/60 Hz). EXAIR's Gen4 Super Ion Air Knife removes static electricity from plastics, webs, sheet stock and other product surfaces where tearing, jamming or hazardous shocks are a problem. The laminar sheet of air sweeps surfaces clean of static, particulate, dust and dirt.
    $2,986.00
Back To Top
Loading...