External Mix Atomizing Spray Nozzles Replace Roll Coater
This customer operates an aluminum processing plant, and was looking for a way to apply an even, thin, consistent coating to wide sheets of metal. Roll coaters had been in long-term use, but they were prone to uneven, sporadic operation, and were proving to be maintenance intensive. They installed a series of Model EB1040SS External Mix Wide Angle Flat Fan Pattern Atomizing Spray Nozzles, which consistently apply their coating, and are virtually maintenance free.
-
Model 901556 1/2 NPT Atomizing Nozzle Mounting BracketBrackets for 1/8 FNPT, 1/4 FNPT and 1/2 FNPT Atomizing Nozzles are available for securing nozzles to a wall, frame or other surface. Constructed of Type 301 Stainless Steel. Learn More$35.00 -
Model 901318 1/4 NPT Atomizing Nozzle Mounting BracketBrackets for 1/8 FNPT, 1/4 FNPT and 1/2 FNPT Atomizing Nozzles are available for securing nozzles to a wall, frame or other surface. Learn More$29.00 -
Model SR6010SS 68 GPH 1/2 FNPT No Drip Siphon Fed Round Atomizing Nozzle1/8 FNPT, 1/4 FNPT and 1/2 FNPT no drip siphon fed round pattern nozzles preserve precious liquids and protect product finished from drips. They are a good choice where no liquid pressure is available and a thin coating is needed at a specific area. Flow rate is adjustable via the adjusting valve. Siphon nozzles work best with a suction height of 36" (914mm) or less. Made from 303SS for corrosion resistance. Siphon or gravity fed for non-pressurized applications. Learn More$1,121.00 -
Model EF6010SS 303.0 GPH 1/2 FNPT No Drip Ext Mix Narrow Angle Flat Fan Pattern Nozzle1/8 FNPT, 1/4 FNPT and 1/2 FNPT no drip external mix narrow angle flat fan pattern nozzles feature their ability to positively stop liquid flow when the compressed air is shut off helps conserve expensive liquids and protects the product finish from drips. They are great where a high volume of liquid is needed over a concentrated area. Since they are external mix, airflow and liquid flow can be controlled independently. Learn More$1,194.00 -
Model ER2020SS 7.5 GPH 1/4 FNPT No Drip Ext Mix Round Atomizing Nozzle1/4 FNPT no drip external mix round pattern nozzles feature their ability to preserve precious liquids and protect product finished from drips. They are great where a high volume of liquid is needed over a specific area or general area, but not in a flat pattern. Since they are external mix, airflow and liquid flow can be controlled independently. For pressure fed applications with independent air and liquid control. Learn More$554.00 -
Model SR2020SS 1.9 GPH 1/4 FNPT No Drip Siphon Fed Round Atomizing Nozzle1/8 FNPT, 1/4 FNPT and 1/2 FNPT no drip siphon fed round pattern nozzles preserve precious liquids and protect product finished from drips. They are a good choice where no liquid pressure is available and a thin coating is needed at a specific area. Flow rate is adjustable via the adjusting valve. Siphon nozzles work best with a suction height of 36" (914mm) or less. Made from 303SS for corrosion resistance. Siphon or gravity fed for non-pressurized applications. Learn More$477.00 -
Model SR2030SS 5.8 GPH 1/4 FNPT No Drip Siphon Fed Round Atomizing Nozzle1/8 FNPT, 1/4 FNPT and 1/2 FNPT no drip siphon fed round pattern nozzles preserve precious liquids and protect product finished from drips. They are a good choice where no liquid pressure is available and a thin coating is needed at a specific area. Flow rate is adjustable via the adjusting valve. Siphon nozzles work best with a suction height of 36" (914mm) or less. Made from 303SS for corrosion resistance. Siphon or gravity fed for non-pressurized applications. Learn More$477.00 -
Model SR2040SS 15.0 GPH 1/4 FNPT No Drip Siphon Fed Round Atomizing Nozzle1/8 FNPT, 1/4 FNPT and 1/2 FNPT no drip siphon fed round pattern nozzles preserve precious liquids and protect product finished from drips. They are a good choice where no liquid pressure is available and a thin coating is needed at a specific area. Flow rate is adjustable via the adjusting valve. Siphon nozzles work best with a suction height of 36" (914mm) or less. Made from 303SS for corrosion resistance. Siphon or gravity fed for non-pressurized applications. Learn More$477.00 -
Model SR2010SS 0.8 GPH 1/4 FNPT No Drip Siphon Fed Round Atomizing Nozzle1/8 FNPT, 1/4 FNPT and 1/2 FNPT no drip siphon fed round pattern nozzles preserve precious liquids and protect product finished from drips. They are a good choice where no liquid pressure is available and a thin coating is needed at a specific area. Flow rate is adjustable via the adjusting valve. Siphon nozzles work best with a suction height of 36" (914mm) or less. Made from 303SS for corrosion resistance. Siphon or gravity fed for non-pressurized applications. Learn More$477.00 -
Model ER1040SS 31.0 GPH 1/4 FNPT Ext Mix Round Atomizing NozzleEXAIR's 1/4 FNPT external mix round pattern nozzles are great where a high volume of liquid is needed over a specific area or general area, but not in a flat pattern. Applications include spot treatments of parts, covering irregularly shaped objects and rinsing. Learn More$336.00 -
Model ER1050SS 60.0 GPH 1/4 FNPT Ext Mix Round Atomizing NozzleEXAIR's 1/4 FNPT external mix round pattern nozzles are great where a high volume of liquid is needed over a specific area or general area, but not in a flat pattern. Applications include spot treatments of parts, covering irregularly shaped objects and rinsing. Learn More$336.00 -
Model ER1030SS 14.0 GPH 1/4 FNPT Ext Mix Round Atomizing NozzleEXAIR's 1/4 FNPT external mix round pattern nozzles are great where a high volume of liquid is needed over a specific area or general area, but not in a flat pattern. Applications include spot treatments of parts, covering irregularly shaped objects and rinsing. Learn More$336.00
