Spill Prevention
Company manufactures industrial cleaning equipment. When changing out hydraulic lines on their equipment it necessitates draining the hydraulic reservoirs to prevent fluid from pouring out when they make a disconnect. Installing the Model 800001 Low Vacuum E-Vac Vacuum Generator onto the vent port on the reservoir housing, they were able to impart just enough vacuum to hold the fluid in while they disconnect the lines and changed them out. This not only saved labor but prevented spillage and a housekeeping issue.
-
Model 800003M 3.1 SCFM E-Vac Low Vacuum Generator with Straight Through Muffler (Porous)
EXAIR's In-Line E-Vacs with Mufflers include sound reducing mufflers that are designed to significantly lower noise without affecting the E-Vac's performance. In-Line E-Vacs are engineered to produce instantaneous vacuum at the point-of-use. These single stage, cylindrical units are compact and easy to mount. Low vacuum units up to 21" Hg (71 kPa) with vacuum flows up to 18.5 SCFM (524 SLPM) are typically used for porous materials
Learn More$139.00 -
Model 800001H 1.5 SCFM E-Vac Low Vacuum Generator with Standard Muffler (Porous)
EXAIR's In-Line E-Vacs with Mufflers include sound reducing mufflers that are designed to significantly lower noise without affecting the E-Vac's performance. In-Line E-Vacs are engineered to produce instantaneous vacuum at the point-of-use. These single stage, cylindrical units are compact and easy to mount. Low vacuum units up to 21" Hg (71 kPa) with vacuum flows up to 18.5 SCFM (524 SLPM) are typically used for porous materials
Learn More$126.00 -
Model 800001M 1.5 SCFM E-Vac Low Vacuum Generator with Straight Through Muffler (Porous)
EXAIR's In-Line E-Vacs with Mufflers include sound reducing mufflers that are designed to significantly lower noise without affecting the E-Vac's performance. In-Line E-Vacs are engineered to produce instantaneous vacuum at the point-of-use. These single stage, cylindrical units are compact and easy to mount. Low vacuum units up to 21" Hg (71 kPa) with vacuum flows up to 18.5 SCFM (524 SLPM) are typically used for porous materials
Learn More$139.00 -
Model 800013M 12.6 SCFM E-Vac Low Vacuum Generator with Straight Through Muffler (Porous)
EXAIR's In-Line E-Vacs with Mufflers include sound reducing mufflers that are designed to significantly lower noise without affecting the E-Vac's performance. In-Line E-Vacs are engineered to produce instantaneous vacuum at the point-of-use. These single stage, cylindrical units are compact and easy to mount. Low vacuum units up to 21" Hg (71 kPa) with vacuum flows up to 18.5 SCFM (524 SLPM) are typically used for porous materials
Learn More$305.00 -
Model 810003 3.3 SCFM E-Vac High Vacuum Generator (Non-Porous)These single stage, cylindrical units are compact and easy to mount at the point of use. High vacuum units up to 27" Hg (91 kPa) with vacuum flows up to 15.8 SCFM (447 SLPM) are typically used for non-porous materials such as glass, steel sheet and plastic. There are 7 In-Line models that vary by flow and vacuum level. Learn More$104.00
-
Model 810002 2.3 SCFM E-Vac High Vacuum Generator (Non-Porous)These single stage, cylindrical units are compact and easy to mount at the point of use. High vacuum units up to 27" Hg (91 kPa) with vacuum flows up to 15.8 SCFM (447 SLPM) are typically used for non-porous materials such as glass, steel sheet and plastic. There are 7 In-Line models that vary by flow and vacuum level. Learn More$104.00
-
Model 810031 30.8 SCFM E-Vac High Vacuum Generator (Non-Porous)These single stage, cylindrical units are compact and easy to mount at the point of use. High vacuum units up to 27" Hg (91 kPa) with vacuum flows up to 15.8 SCFM (447 SLPM) are typically used for non-porous materials such as glass, steel sheet and plastic. There are 7 In-Line models that vary by flow and vacuum level. Learn More$386.00
-
Model 810023 23.1 SCFM E-Vac High Vacuum Generator (Non-Porous)These single stage, cylindrical units are compact and easy to mount at the point of use. High vacuum units up to 27" Hg (91 kPa) with vacuum flows up to 15.8 SCFM (447 SLPM) are typically used for non-porous materials such as glass, steel sheet and plastic. There are 7 In-Line models that vary by flow and vacuum level. Learn More$245.00
-
Model 810006 6.2 SCFM E-Vac High Vacuum Generator (Non-Porous)These single stage, cylindrical units are compact and easy to mount at the point of use. High vacuum units up to 27" Hg (91 kPa) with vacuum flows up to 15.8 SCFM (447 SLPM) are typically used for non-porous materials such as glass, steel sheet and plastic. There are 7 In-Line models that vary by flow and vacuum level. Learn More$104.00
-
Model 810008 8.4 SCFM E-Vac High Vacuum Generator (Non-Porous)These single stage, cylindrical units are compact and easy to mount at the point of use. High vacuum units up to 27" Hg (91 kPa) with vacuum flows up to 15.8 SCFM (447 SLPM) are typically used for non-porous materials such as glass, steel sheet and plastic. There are 7 In-Line models that vary by flow and vacuum level. Learn More$155.00