Cooling

Case Study Application
  1. Model 5904 Mini Cooler Single Point Hose Kit
    Application
    Model 5904 Single Point Hose Kit for Mini Cooler
    Flexible Single Point Hose Kit, recommended when heat is generated over a smaller surface area. Single Point Hose Kits include cone and flat fan nozzles for aiming the cold air flow and are approximately 6" long.
    $33.30
  2. Model 3998 Cooling Kit (Up to 10
    Application
    Model 3998 Cooling Kit (Up to 10,200 Btu/hr.)

    This kit includes the large Vortex Tube and all interchangeable generator sets for cooling rates up to 10,200 Btu/hr (2,570 kcal/hr.) The filter, cold air muffler, hose and clips are also included. Vortex Tubes convert an ordinary supply of compressed air into two streams; one hot and one cold. Applications include cooling hot melts, cutting tools, welding horns, electronic controls, soldered parts and gas samples. Temperatures adjustable from -50°F to +250°F.

    $2,171.00
  3. Model 3906 Cold Muffler 50-150 SCFM
    Application
    Model 3906 Cold Muffler 50-150 SCFM
    Noise Muffling: EXAIR offers mufflers for both the hot and cold air discharge. Normally, muffling is not required if the cold air is ducted.
    $138.00
  4. Model 3538 Buna-N O-Ring (Large Vortex Tube Generators)
    Application
    Model 3538 Buna-N O-Ring (Large Vortex Tube Generators)

    Buna-N O-ring for Large Vortex Generators

    $2.73
  5. Model 3620 Viton O-Ring (Medium Vortex Tube with brass Generator)
    Application
    Model 3620 Viton O-Ring (Medium Vortex Tube with brass Generator)

    Viton O-Ring for medium Vortex Tubes

    $4.90
  6. Model 9522 Tubing Clip
    Application
    Model 9522 Tubing Clip

    Tubing Clip

    $2.73
  7. Model 9523 Nylon Tube Fitting 3/8 NPT male x 1/2" hose
    Application
    Model 9523 Nylon Tube Fitting 3/8 NPT male x 1/2" hose

    Nylon Tube Fitting

    $2.73
  8. Model 9622 Vinyl Tubing 1" o.d. x 3/4" i.d., 10" length
    Application
    Model 9622 Vinyl Tubing 1" o.d. x 3/4" i.d., 10" length

    Vinyl Tubing

    $9.06
  9. Model 900582 Viton O-Ring (Small Vortex Tube with brass Generator)
    Application
    Model 900582 Viton O-Ring (Small Vortex Tube with brass Generator)

    Viton O-Ring for small Vortex Tubes

    $2.73
  10. Model 150-R Generator for Large Vortex Tubes (150 SCFM)
    Application
    Model 150-R Generator for Large Vortex Tubes

    Generators set the total volume of air flow through the Vortex Tube and are available to create the coldest temperature possible or the best Btu/hr. values. (150 SCFM)

    $89.00
Back To Top
Loading...