Model SR1040SS 15.0 GPH 1/4 FNPT Siphon Fed Round Atomizing Nozzle

EXAIR's 1/8 FNPT, 1/4 FNPT and 1/2 FNPT siphon fed round pattern nozzles are great where no liquid pressure is available and a
Model
SR1040SS
$272.00

View More
EXAIR's 1/8 FNPT, 1/4 FNPT and 1/2 FNPT siphon fed round pattern nozzles are great where no liquid pressure is available and a thin coating is needed at a specific area. Flow rate is adjustable via the adjusting valve. Siphon nozzles work best with a suction height of 36" (914mm) or less. Since these nozzles are siphon fed, the compressed airflow draws the liquid in and mixes it internally. Liquid flow is dependent both on the gravity or suction height and the airflow. Siphon fed round pattern nozzles provide the most liquid flow of any siphon fed nozzle. Siphon or gravity fed for non-pressurized applications.

Applications

  • Washing
  • Rinsing
  • Coating
  • Cooling
  • Quenching
  • Wetting (moistening)
  • Humidification
  • Dust Control

Advantages

  • Fully adjustable
  • Maximizes liquid dispersion
  • Minimizes liquid consumption
  • All stainless steel construction
  • Compact
  • Versatile
  • Interchangeable liquid and air caps
  • Minimizes air consumption
  • Fine atomization

Atomizing Nozzle Materials

Type 303 Stainless Steel - All of EXAIR's Atomizing Nozzles are constructed with Type 303 stainless steel, which can resist high temperatures and corrosive environments. They are designed for environments with a maximum operating temperature of 800°F (426°C).

Accessories

Mounting bracket for 1/4 NPT Atomizing NozzlesMounting bracket for 1/2 NPT Atomizing Nozzles

Mounting Brackets - available for 1/8 FNPT, 1/4 FNPT and 1/2 FNPT models. Provides a secure mount for EXAIR's Atomizing Nozzles. Constructed of Type 301 stainless steel.

Dimensions & Performance

Siphon Fed Round Pattern Atomizing Nozzles

(1/8 FNPT Models)

Dimensions - 1/8 FNPT Siphon Fed Round Pattern Atomizing Nozzle
 

SR8010SS

SR8020SS

SR8030SS

Air Pressure PSI 10 20 40 60 10 20 40 60 10 20 40 60
BAR 0.7 1.4 2.8 4.1 0.7 1.4 2.8 4.1 0.7 1.4 2.8 4.1
Air Flow SCFM 0.48 0.68 1.35 2.12 0.59 1.16 1.9 2.62 0.55 1.06 1.86 2.45
SLPM 13.6 19.2 38.3 59.9 16.7 32.8 53.8 74.2 15.6 30.0 52.7 69.4
Gravity Head 18" 0.35 0.41 0.49 0.53 0.61 0.73 0.88 0.96 1.31 1.66 1.89 1.98
46 cm 1.3 1.6 1.9 2.0 2.3 2.8 3.3 3.6 5.0 6.3 7.2 7.5
12" 0.33 0.40 0.48 0.52 0.53 0.7 0.8 0.92 1.22 1.59 1.8 1.86
30 cm 1.2 1.5 1.8 2.0 2.0 2.6 3.0 3.5 4.6 6.0 6.8 7.0
6" 0.27 0.43 0.46 0.50 0.48 0.66 0.76 0.82 0.96 1.23 1.53 1.58
15 cm 1.0 1.6 1.7 1.9 1.8 2.5 2.9 3.1 3.6 4.7 5.8 6.0
Siphon Height 4" 0.21 0.27 0.35 0.40 0.35 0.58 0.66 0.75 0.76 1.07 1.34 1.46
10 cm 0.8 1.0 1.3 1.5 1.3 2.2 2.5 2.8 2.9 4.1 5.1 5.5
8" 0.21 0.26 0.32 0.42 0.33 0.55 0.58 0.68 0.61 1.13 1.49 1.74
20 cm 0.8 1.0 1.2 1.6 1.2 2.1 2.2 2.6 2.3 4.3 5.6 6.6
12" 0.17 0.24 0.30 0.33 0.24 0.4 0.53 0.6 0.53 0.92 1.19 1.34
30 cm 0.7 0.9 1.1 1.3 0.9 1.5 2.0 2.3 2.0 3.5 4.5 5.1
24" -- 0.23 0.26 0.28 -- 0.35 0.45 0.52 -- 0.76 1.05 1.29
61 cm -- 0.9 1.0 1.1 -- 1.3 1.7 2.0 -- 2.9 4.0 4.9
36" -- -- 0.23 0.25 -- -- 0.38 0.46 -- -- 0.82 1.04
91 cm -- -- 0.9 0.9 -- -- 1.4 1.7 -- -- 3.1 3.9
 

SR8040SS

SR8050SS

Air Pressure PSI 10 20 40 60 10 20 40 60
BAR 0.7 1.4 2.8 4.1 0.7 1.4 2.8 4.1
Air Flow SCFM 1.40 2.03 3.17 4.42 1.84 2.93 4.02 5.12
SLPM 39.5 57.5 89.8 125 52.1 82.9 114 145
Gravity Head 18" 2.65 3.01 3.58 4.09 1.84 2.93 4.02 5.12
46 cm 10.0 11.4 13.6 15.5 7.0 11.1 15.2 19.4
12" 2.43 2.86 3.55 3.99 4.16 5.53 5.83 5.92
30 cm 9.2 10.8 13.4 15.1 15.7 20.9 22.1 22.4
6" 2.12 2.53 3.29 3.75 3.83 3.7 4.39 5.56
15 cm 8.0 9.6 12.0 14.0 14.0 14.0 17.0 21.0
Siphon Height 4" 1.22 1.78 2.54 3.03 3.28 4.12 4.6 5.5
10 cm 4.6 6.7 9.6 11.5 12.4 15.6 17.4 20.8
8" 1.00 1.57 2.48 2.98 3.1 3.51 4.31 5.09
20 cm 3.8 6.0 9.4 11.3 11.7 13.3 16.3 19.3
12" -- 1.37 2.18 2.85 2.45 3.98 5.08 5.33
30 cm -- 5.2 8.2 11.0 9.3 15.0 19.0 20.0
24" -- -- 1.98 2.59 0.74 3.35 4.16 5.18
61 cm -- -- 7.5 9.8 2.8 12.7 15.7 19.6
36" -- -- 1.22 2.11 -- 1.8 2.93 3.84
91 cm -- -- 4.6 8.0 -- 6.8 11.1 14.5

Dimensions & Performance

Siphon Fed Round Pattern Atomizing Nozzles

(1/4 FNPT Models)

Dimensions - 1/4 FNPT Siphon Fed Round Pattern Atomizing Nozzle
 

SR1010SS

SR1020SS

SR1030SS

SR1040SS

Air Pressure PSI 10 20 40 60 10 20 40 60 20 40 60 80 30 40 60 80
BAR 0.7 1.4 2.8 4.1 0.7 1.4 2.8 4.1 1.4 2.8 4.1 5.5 2.1 2.8 4.1 5.5
Air Flow SCFM 0.5 0.7 1.2 1.6 0.7 1.1 1.7 2.3 2.0 3.2 4.3 5.6 5.7 6.9 9.5 12.0
SLPM 14.2 19.8 34.0 45.3 19.8 31.1 48.1 65.0 56.6 90.6 122 158 161 195 269 340
Gravity Head 18" 0.6 0.6 0.7 0.8 1.1 1.3 1.6 1.9 4.3 5.0 5.5 5.8 12.3 13.0 14.3 15.0
46 cm 2.3 2.3 2.6 3.0 4.2 4.9 6.1 7.2 16.3 18.9 20.8 22.0 46.6 49.2 54.1 56.8
12" 0.5 0.6 0.7 0.8 0.9 1.1 1.5 1.7 3.8 4.4 4.9 5.3 11.0 11.8 13.0 13.5
30 cm 1.9 2.3 2.6 3.0 3.4 4.2 5.7 6.4 14.4 16.7 18.5 20.1 41.6 44.7 49.2 51.1
6" 0.4 0.5 0.6 0.7 0.8 1.0 1.4 1.6 3.3 4.0 4.5 4.9 9.3 10.0 11.5 12.5
15 cm 1.5 1.9 2.3 2.6 3.0 3.8 5.3 6.1 12.5 15.1 17.0 18.5 35.2 37.9 43.5 47.3
Siphon Height 4" 0.2 0.4 0.5 0.6 0.5 0.8 1.2 1.4 2.5 3.3 3.7 4.1 6.3 7.3 8.5 9.5
10 cm 0.8 1.5 1.9 2.3 1.9 3.0 4.5 5.3 9.5 12.5 14.0 15.5 23.8 27.6 32.2 36.0
8" 0.2 0.4 0.5 0.5 0.4 0.7 1.0 1.2 1.8 2.9 3.4 3.9 5.3 6.5 7.5 8.5
20 cm 0.8 1.5 1.9 1.9 1.5 2.6 3.8 4.5 6.8 11.0 12.9 14.8 20.1 24.6 28.4 32.2
12" -- 0.3 0.4 0.5 0.3 0.6 1.0 1.2 1.3 2.5 3.1 3.7 4.5 5.5 6.5 7.5
30 cm -- 1.1 1.5 1.9 1.1 2.3 3.8 4.5 4.9 9.5 11.7 14.0 17.0 20.8 24.6 28.4
24" -- -- 0.3 0.4 -- 0.3 0.7 0.9 0.3 1.3 1.9 2.6 0.6 1.5 2.3 3.5
61 cm -- -- 1.1 1.5 -- 1.1 2.6 3.4 1.1 4.9 7.2 9.8 2.3 5.7 8.7 13.2
36" -- -- 0.2 0.2 -- -- 0.4 0.5 -- 1.0 1.5 1.7 -- 0.3 1.5 1.9
91 cm -- -- 0.8 0.8 -- -- 1.5 1.9 -- 3.8 5.7 6.4 -- 1.1 5.7 7.2

Dimensions & Performance

Siphon Fed Round Pattern Atomizing Nozzles

(1/2 FNPT Models)

Dimensions - 1/2 FNPT Siphon Fed Round Pattern Atomizing Nozzle
 

SR5010SS

Air Pressure PSI 20 30 40 50 60 70 80
BAR 1.4 2.1 2.8 3.4 4.1 4.8 5.5
Air Flow SCFM 19.3 25.2 32.8 36.7 42.2 47.7 52.9
SLPM 547 714 929 1039 1195 1351 1498
Gravity Head 18" -- -- -- 61 59.1 66 68.3
46 cm -- -- -- 231 224 250 259
12" -- -- 56.8 57.4 57.4 58.6 59.1
30 cm -- -- 215 217 217 222 224
6" -- -- 41 42.8 43.8 43.8 44.5
15 cm -- -- 155 162 166 166 168
Siphon Height 4" 22.1 28.6 31.5 32.1 33.1 35.3 44.6
10 cm 84 108 119 121 125 134 169
8" 14.3 25.7 28.4 30.2 33 35.3 36.9
20 cm 54 97 107 114 125 134 140
12" -- 12.3 19.6 21.8 25.7 29.7 31.5
30 cm -- 47 74 83 97 112 119
24" -- -- -- -- 9.9 12.5 17.5
61 cm -- -- -- -- 37 47 66

Spray Dimensions

Siphon Fed Round Pattern Atomizing Nozzle

(1/8 FNPT Models)

Spray Dimensions - 1/8 FNPT Siphon Fed Round Pattern Atomizing Nozzle

Spray Dimensions at 8" (20 cm) Siphon Height

Model

Air Pressure

Width

Max Depth

PSI

BAR

A

B

C

ft

m

in

cm

in

cm

in

cm

SR8010SS 10 0.7 1.5 4 2 5 3 8 1.5 0.5
20 1.4 1.5 4 2 5 3 8 1.5 0.5
40 2.8 1.5 4 2 5 3 8 2 0.6
60 4.1 1.5 4 2 5 3 8 3 0.9
SR8020SS 10 0.7 1.5 4 2 5 3 8 1.5 0.5
20 1.4 1.5 4 2 5 3 8 2 0.6
40 2.78 1.5 4 2 5 3 8 3 0.9
60 4.1 1.5 4 2 5 3 8 4 1.2
SR8030SS 10 0.7 1.5 4 2 5 3 8 1.5 0.5
20 1.4 1.5 4 2 5 3 8 3 0.9
40 2.78 1.5 4 2 5 3 8 4 1.2
60 4.1 1.5 4 2 5 3 8 5 1.5
SR8040SS 10 0.7 1.5 4 2 5 3 8 9 0.9
20 1.4 1.5 4 2 5 3 8 4 1.2
40 2.78 1.5 4 2 5 3 8 4 1.2
60 4.1 1.5 4 2 5 3 8 5 1.5
SR8050SS 20 1.4 1.5 4 2 5 3 8 5 1.5
40 2.8 1.5 4 2 5 3 8 7 2.1
60 4.1 1.5 4 2 5 3 8 9 2.7
80 5.5 1.5 4 2 5 3 8 10 3.0

Spray Dimensions

Siphon Fed Round Pattern Atomizing Nozzle

(1/4 FNPT Models)

Spray Dimensions - 1/4 FNPT Siphon Fed Round Pattern Atomizing Nozzle

Spray Dimensions at 8" (20 cm) Siphon Height

Model

Air Pressure

Width

Max Depth

PSI

BAR

A

B

C

ft

m

in

cm

in

cm

in

cm

SR1010SS 10 0.7 2.5 6 4.0 10 5.8 15 7 2.1
20 1.4 3.3 8 4.3 11 6.0 15 9 2.7
40 2.8 3.8 10 5.0 13 6.8 17 10 3.0
60 4.1 3.8 10 5.0 13 6.8 17 11 3.4
SR1020SS 10 0.7 3.3 8 4.8 12 6.8 17 9 2.7
20 1.4 3.5 9 5.0 13 7.0 18 11 3.4
40 2.8 3.8 10 5.5 14 7.5 19 14 4.3
60 4.1 4.0 10 5.8 15 8.0 20 16 4.9
SR1030SS 20 1.4 3.5 9 5.0 13 7.0 18 12 3.7
40 2.8 3.8 10 5.3 13 7.5 19 13 4.0
60 4.1 3.8 10 5.5 14 8.0 20 15 4.6
80 5.5 4.0 10 5.8 15 8.3 21 18 5.5
SR1040SS 30 2.1 4.8 12 6.5 17 8.8 22 19 5.8
40 2.8 5.2 13 7.0 18 9.3 24 21 6.4
60 4.1 5.5 14 7.5 19 9.8 25 24 7.3
80 5.5 5.8 15 7.8 20 10.0 25 27 8.2

Spray Dimensions

Siphon Fed Round Pattern Atomizing Nozzle

(1/2 FNPT Models)

Spray Dimensions - 1/2 FNPT Siphon Fed Round Pattern Atomizing Nozzle

Spray Dimensions at 8" (20cm) Siphon Height

Model

Air Pressure

Width

Max Depth

PSI

BAR

B

ft

m

in

cm

SR5010SS 20 1.4 6 15 22 6.7
30 2.1 6 15 25 7.6
40 2.8 6 15 28 8.5
50 3.4 6 15 29 8.8
60 4.1 6 15 31 9.4
70 4.8 6 15 35 10.7
80 5.5 6 15 37 11.3

Atomizing Nozzle Standards and Certifications

CE Compliant

EXAIR Atomizing Nozzles comply with the EU General Product Safety Directive (2001/95/EC) and meet the noise limitation requirements of the EU Machinery Directive (2006/42/EC). All sound level measurements are taken at 3 feet away.

Conflict Mineral Free

Look for this symbol to designate conflict mineral free products throughout our website. EXAIR supports Section 1502 of the Dodd-Frank Wall Street Reform and Consumer Protection Act and we are committed to compliance with the conflict minerals rule in order to curb the illicit trade of tin, tantalum, tungsten and gold in the DRC region. EXAIR is using the CMRT 3.02 template to document our supply chain and commitment to conflict free products.

Caution WARNING! Cancer and Reproductive Harm - www.P65Warnings.ca.gov/product

Awards - Siphon Fed Atomizing Nozzle

2011 New Equipment Digest King Award Winner

EXAIR's 1/4 FNPT Siphon Fed Atomizing Nozzles were a winner of the 2011 New Equipment Digest King Awards. The 1/4 FNPT Siphon Fed Atomizing Nozzle family won in the Fluid/Pneumatic Power category.

2012 Plant Engineering Product of the Year Award

EXAIR's 1/4 FNPT Siphon Fed Atomizing Nozzles were a Gold winner in the 2012 Plant Engineering Product of the Year Awards. The 1/4 FNPT Siphon Fed Atomizing Nozzle family placed in the Fluid Handling category.

2013 New Equipment Digest King Award Winner

EXAIR's Siphon Fed Atomizing Nozzles were a winner of the 2013 New Equipment Digest King Awards. The Siphon Fed Atomizing Nozzle family won in the Fluid/Pneumatic Power category.

Droplet Size

Droplet size illustration

One of the primary reasons atomizing spray nozzles are used is because of their fine droplet size. Benefits of fine droplet size include even coating and liquid conservation. For reference, a large raindrop is around 6,000 microns (0.236") in diameter. Standard liquid nozzles produce droplet sizes ranging from 4,000 microns (0.157") down to 300 microns (0.012") in diameter. EXAIR's Atomizing Nozzles produce minuscule droplet sizes in the range of 100 microns (0.004") to 20 microns (0.0008")!

Droplet Size

ModelLiquid PressureAir PressureDroplet Size (μm*)
AN1020SS20PSI40 PSI71
40PSI65 PSI83
ER1020SS5 PSI40 PSI39
20 PSI40 PSI57
SR1020SS4" Siphon Height20 PSI25
4" Siphon Height40 PSI22

*Volume Median Diameter Dv(50.0) of liquid droplets.

1μ = 1 micron = 0.00004".

All tests performed with water.

Spray Angle

Spray angle illustration

The Spray Angle is the trigonometric angle created by the width of the spray pattern and the distance at which it is measured. This angle can vary greatly within a given family of atomizing nozzles depending on flow rates and pressures, but will generally fall into the ranges below:

Spray Angle

Model Family Minimum Angle Maximum Angle
Internal Mix Narrow Angle Round Pattern- AN1010SS, AN2010SS, etc. 20° 45°
Internal Mix Wide Angle Round Pattern- AW1010SS, AW2010SS, etc. 50° 90°
Internal Mix Flat Fan Pattern- AF1010SS, AF2010SS, etc. 50° 120°
External Mix Round Pattern - ER1010SS, ER2010SS, etc. 25° 60°
External Mix Narrow Angle Flat Fan Pattern - EF1010SS, EF2010SS, etc. 35° 70°
External Mix Wide Angle Flat Fan Pattern - EB1010SS, EB2010SS, etc. 50° 105°
Siphon Fed Round Pattern SR1010SS, SR2010SS, etc. 20° 50°
Siphon Fed Flat Fan Pattern SF1010SS, SF2010SS, etc. 50° 100°
Use our Application Assistance Worksheet to submit information about your application. When you submit this information, we will respond with our recommendation for the EXAIR product best suited for the application. Please complete the Application Assistance Worksheet and click submit or print the completed .pdf file and fax it to us at (513) 671-3363. For immediate help, call our Application Engineering Department at 1 800-903-9247.
Loading ...
To download available CADs and use the 3D viewer, please login and select a model.
Loading ...
Back To Top