Adjustable Spot Cooler Aids Polycarbonate Machining
Our customer had a job to produce a product called a "bake and brine injector" used in the food industry. This product is made from lexan polycarbonate. They first milled 1/2" slots into the lexan and then drilled two 3/4" holes into two of the slots. The drilling process resulted in a large burr which was melted and stuck to the lexan. A secondary hand cutting and filing operation was needed to remove the burr. They outfitted the drill with an EXAIR Model 3925 Adjustable Spot Cooler which kept the drill cool enough to allow the lexan to form chips and not melt onto the slots. The Adjustable Spot Cooler has eliminated the need for the secondary operation, sped up production time and decreased cost.
-
Model 5904 Single Point Hose Kit for Mini CoolerFlexible Single Point Hose Kit, recommended when heat is generated over a smaller surface area. Single Point Hose Kits include cone and flat fan nozzles for aiming the cold air flow and are approximately 6" long. Learn More$30.00 -
Model 3905 Cold Muffler for 2-8 SCFMNoise Muffling: EXAIR offers mufflers for both the hot and cold air discharge. Normally, muffling is not required if the cold air is ducted. Learn More$47.00 -
Model 3808 Mini Cooler System, One Cold OutletEXAIR's Mini Cooler produces a stream of 20°F (-7°C) cold air to prevent heat build-up. The Mini Cooler is particularly effective on high speed operations to prevent burning, melting and heat related breakage. Learn More$443.00 -
Model 3725 Adjustable Spot Cooler onlyEXAIR's compressed air powered Adjustable Spot Cooler offers a low cost, reliable, maintenance free solution to a variety of industrial spot cooling problems. With the turn of a knob, you can select a precise temperature setting from -30°F (-34°C) to room temperature. Learn More$447.00 -
Model 3708 Mini CoolerEXAIR's Mini Cooler produces a stream of 20°F (-7°C) cold air to prevent heat build-up. The Mini Cooler is particularly effective on high speed operations to prevent burning, melting and heat related breakage. Learn More$350.00 -
Model 3596 Generator Kit and Small Parts for Large Vortex TubesGenerator Kit for large Vortex Tube Cooling Kit Learn More$544.00 -
Model 3595 Generator Kit and Small Parts for Medium Vortex TubesGenerator Kit for medium Vortex Tube Cooling Kit Learn More$113.00 -
Model 3594 Generator Kit and Small Parts for Small Vortex TubesGenerator Kit for small Vortex Tube Cooling Kit Learn More$57.00 -
Model 3907 Hot Muffler for 50-150 SCFMNoise Muffling: EXAIR offers mufflers for both the hot and cold air discharge. Normally, muffling is not required if the cold air is ducted. Learn More$70.00 -
Model 3903 Hot Muffler for 2-40 SCFMNoise Muffling: EXAIR offers mufflers for both the hot and cold air discharge. Normally, muffling is not required if the cold air is ducted. Learn More$43.00 -
Model 3906 Cold Muffler 50-150 SCFMNoise Muffling: EXAIR offers mufflers for both the hot and cold air discharge. Normally, muffling is not required if the cold air is ducted. Learn More$126.00 -
Model 3901 Cold Muffler for 10-40 SCFMNoise Muffling: EXAIR offers mufflers for both the hot and cold air discharge. Normally, muffling is not required if the cold air is ducted. Learn More$49.00 -
Model 3908 Cooling Kit (Up to 550 Btu/hr.)If you are unsure of your flow and temperature requirements, EXAIR recommends the purchase of an EXAIR Cooling Kit. It contains a vortex tube, cold air muffler, air line filter and all generators required to experiment with the full range of airflows and temperatures. Model 3908 for up to 550 Btu/hr. (139 Kcal/hr.). Temperatures adjustable from -50 to +260 Fahrenheit. Learn More$435.00 -
Model 3998 Cooling Kit (Up to 10,200 Btu/hr.)This kit includes the large Vortex Tube and all interchangeable generator sets for cooling rates up to 10,200 Btu/hr (2,570 kcal/hr.) The filter, cold air muffler, hose and clips are also included. Vortex Tubes convert an ordinary supply of compressed air into two streams; one hot and one cold. Applications include cooling hot melts, cutting tools, welding horns, electronic controls, soldered parts and gas samples. Temperatures adjustable from -50°F to +250°F.
Learn More$1,987.00 -
Model 3825 Adjustable Spot Cooler System (one cold outlet)EXAIR's Adjustable Spot Cooler System (one cold outlet) includes everything needed for a single point cooling station that offers a low cost, reliable, maintenance free solution to a variety of industrial spot cooling problems. With the turn of a knob, you can select a precise temperature setting from -30°F (-34°C) to room temperature. Learn More$648.00 -
Model 5905 Dual Point Hose Kit for Mini CoolerFlexible Dual Point Hose Kit, recommended when heat is generated over a larger surface area. Dual Point Hose Kits include cone and flat fan nozzles for aiming the cold air flow and are approximately 6" long. Learn More$40.00